Home › gear

shop work

pictures from the iceboating shop

Test fit

September 4, 2014 - 02:18 — Drifter
Test fit

Bottoms up

June 30, 2014 - 01:05 — Drifter
Bottoms up

Whole Lotta Basswood

June 15, 2014 - 16:49 — Drifter
Whole Lotta Basswood

Framed !!

May 27, 2014 - 01:29 — Drifter
Framed !!

All the frames are on the form and the chines are on.

Frames are all cut out !!

May 13, 2014 - 03:19 — Drifter
Frames are all cut out !!

The frames are cut out for the new C Skeeter

May 13, 2014 - 02:57 — Drifter
The frames are cut out for the new C Skeeter

Plank for new C Skeeter

July 29, 2013 - 01:51 — Drifter
Plank for new C Skeeter

Together again for the first time...

January 23, 2011 - 07:19 — GeoffS
Together again for the first time...
  • 13082 reads

Almost done...

January 22, 2011 - 09:14 — GeoffS
Almost done...
  • 13754 reads

Drilling chock holes

January 22, 2011 - 09:12 — GeoffS
Drilling chock holes
  • 11018 reads

Drilling chock holes

January 22, 2011 - 09:11 — GeoffS
Drilling chock holes
  • 9701 reads

Plank hardware locating jig - plank side

January 22, 2011 - 09:11 — GeoffS
Plank hardware locating jig - plank side
  • 11055 reads

Plank Deflected vs. Unloaded

January 20, 2011 - 08:37 — GeoffS
Plank Deflected vs. Unloaded
  • 11472 reads

Plank Deflection After Shaping

January 20, 2011 - 07:46 — GeoffS
Plank Deflection After Shaping
  • 15046 reads

Little bit of "gull-wing" bend-down at the ends,

January 18, 2011 - 06:46 — GeoffS
Little bit of "gull-wing" bend-down at the ends,
  • 11410 reads
Syndicate content