shop work
Better spring at the bow...
January 11, 2011 - 08:10 — GeoffS
All season my steering post spring has been compressed about an inch with the boat just sitting on the ice. While I was working on it I augmented the spring with the old stand-by, a tennis ball...
- 13114 reads
The patch is weighted down over the hole.
January 7, 2011 - 06:38 — GeoffS
The dowel on the right side is to help fill a void I found at the edge of the access-hole where epoxy apparently didn't flow down completely Tuesday.
- 10481 reads
The patch is weighted down over the hole.
January 7, 2011 - 06:37 — GeoffS
The dowel on the right side is to help fill a void I found at the edge of the access-hole where epoxy apparently didn't flow down completely Tuesday.
- 10789 reads
Look Ma! You can't see through the floor anymore!
January 7, 2011 - 06:33 — GeoffS
The cockpit side of the hole through the floor is ready to be filled with some magic blue stuff, and its patch glued over the top.
- 14156 reads
Close up of some patches.
January 6, 2011 - 18:54 — GeoffS
Because the plywood was ground away over such a wide band, I added a tab of glass over the edge to tie the bottom to the sideboard. It was probably overkill...
- 11295 reads
Random image
Who's new
- Rob Holman
- Egoes3
- Rob Evans
- fishandbee
- serdahl
- Gprw
- toast822
- arrtadho
- Jwnelson
- keukaflyer